Motorola KEY 3000 User Manual page 163

KVL 3000 User's Guide
Perform Initial
Programming
(continued)
3-14
System Dependent Parameters
(continued)
Enter System Key (DVI XL Only)
KVL 3000 requires a 128 digit System Key to
communicate in DVI XL
KVL 3000 is shipped from the factory with a
default System Key. Change this key as
described below.
Important Changing the System Key causes
all keys defined with the DVI XL algorithm
(including the UKEK) to be erased.
1. Navigate to the CONFIG menu, then
navigate to and select SYSKEY. The
following screen will appear:
THE SYSKEY
IS DEFAULT.
EDIT
2. Press to select EDIT. The following
warning screen will appear.
ALL KEY DATA
WILL BE LOST
CONTINUE ?
YES
continued on next page
The
systems. Each
DEFAULT
NO
ASTRO 25 Operation