Motorola KEY 3000 User Manual page 104

KVL 3000 User's Guide
Programming the
USK (continued)
6-4
To create a USK, perform the following:
1. Navigate to the CONFIG menu, then
select USK. The following screen will
appear:
KVL USK
>DES
READY
CLEAR
EDIT
2. Use the or keys to toggle to the
desired algorithm (for dual algorithm
units only).
3. Select EDIT to display the following
screen:
USK (ALGO)
BYTE 01
4. After entering the multi character USK,
SLOT FILLED appears. If the USK is
correct, press the Enter key. If not, press
the Del/Shift key to back out" the digits
and correct the USK entry, then press the
Enter key.
To clear the USK, select CLEAR (instead of
EDIT) in Step 3.
ASN Operation