Motorola KEY 3000 User Manual page 155

KVL 3000 User's Guide
Perform Initial
Programming
(continued)
3-6
User Preference Parameters
(continued)
Set Time and Date The KVL 3000 contains an
internal real time clock that is used to timestamp
(with date and time) the log entries. If you wish
to have these entries timestamped, you must set
the time and date. The clock will continue to run
using power from the 3 V coin cell battery, even
when the KVL 3000 main power is turned off.
To set the time ...
1. Navigate to the CONFIG menu, then
navigate to and select TIME. The
following screen will appear:
THE TIME IS
00:00:00
EDIT
2. Use the key to select EDIT. The
following screen will appear.
ENTER THE
HOURS>J
3. Using the keypad, enter the hours and
press Enter. Repeat for minutes and
seconds. (The clock operates in 24 hour
military style format.)
ASTRO 25 Operation