Motorola KEY 3000 User Manual page 222

Setting Up KVL 3000
for KMF Operation
(continued)
ASTRO 25 Operation
Chapter 7 Using KVL 3000 in OTAR Systems
Hints and Tips for Entering Phone Numbers
D Press the Del/Shift key to backspace and
delete the digit to the left of the flashing
cursor.
D Press the key to insert a comma (,).
Each (,) character represents a 2 second
pause between digit strings. You may use
these pauses to build dial up numbers for
credit or calling card calls. (You must ex
periment with your particular calling card
service to determine the number of
pauses needed and in which locations in
the phone number string they must be
placed. For example, a typical dialing
scenario might be:

Dial Access Number
 Pause 4 seconds (2 commas)
 Dial desired phone number
 Pause 2 seconds (1 comma)
 Dial Credit Card Number (or PIN
number)
D The KVL 3000 display can store phone
numbers with a maximum of 50 digits,
However, the display can show a maxi
mum of 10 digits at a time. For longer
phone numbers, use the
to view the next/previous block of 10 dig
its of the phone number. (In Edit mode,
you may move the cursor immediately to
the end of the phone number by pressing
the key while the cursor is flashing on
the first digit of the phone number. You
may use the or
cursor one character at time.)
z End of This Procedure z
or keys
keys to move the
7-11