Rip Basic Settings - Acer AB460 F1 User Manual

403
Parameter
Circuit ID
Remote ID
RIP
The RIP link opens the following links for configuration of RIP protocol:
• "RIP Basic Settings" on page 403
• "Interfaces" on page 404
• "Neighbors List" on page 406
• "Security Settings" on page 407
• "Address Summarization" on page 408

RIP Basic Settings

Clicking the B
ASIC
The parameters for this page are shown in the following table.
Description
This parameter specifies the DHCP Relay Circuit
identifer.
This parameter specifies the Remote identifer.
S tab brings up the RIP B
ETTINGS
S page.
ASIC ETTINGS