402
Parameter
Service DHCP-Relay
IP DHCP Relay
Information Option
DHCP Server
Address
Interface Settings
Clicking the I
NTERFACE
C
page, which allows you to configure the DHCP relay for
ONFIGURATION
VLANs. The parameters for this page are shown in the following table.
Parameter
VLAN Interface
Description
This parameter specifies the DHCP relay status that can
be enabled or disabled in the switch using this field.
You can enable/disable this field to control the
processing related to the Relay Agent Information
options.
This parameter indicates the IP address of the DHCP
Server to which the Relay Agent needs to forward the
packets from the client.
C
tab brings up the DHCP R
ONF
Description
This parameter specifies the VLAN Interface name.
4 Networking Switch Modules
I
ELAY
NTERFACE