Acer AB460 F1 User Manual page 57

37
After gaining access to the GbE switch(es), you can use the reset button
to reset their configurations to the default settings. The reset button
will reset all GbE switch configurations, including IP address and so on.
InfiniBand Switch
Click on I
NFINIBAND
(Figure 2-18). The I
submenu allows you to check the status of the I
module in the system you are accessing.
Figure 2-18. InfiniBand Switch Status Screen
CMM
Click on CMM to reveal the CMM S
option in the B
LADE
all the CMM modules in the system you are accessing. Master/Slave
status, operating status, firmware version and firmware tag status are
all shown in the main screen.
There are three commands you may give on this screen, as described
below in the following table.
S to reveal the I
WITCH
S option in the B
NFINIBAND WITCH
TATUS
S submenu allows you to check the status of
YSTEM
S S
NFINIBAND WITCH
S
LADE YSTEM
NFINIBAND
screen (Figure 2-19). The CMM
screen
TATUS
S
WITCH