319
Parameter
Community
Owner
Last Time Sent
RMON Alarm Configuration
Clicking the A
LARM
which configures RMON Alarm paramters. The parameters for this
page are shown in the following table.
Parameter
Index
Description
This parameter specifies the SNMP community string
used for this trap. This is relevant when an SNMP trap is
requested for an event. For event type to display,
and Log
TRAP Community
and
Also make sure the configured community is active
before adding an event on that community.
This parameter indicates the owner of this event.
This parameter denotes the time this event entry last
generated an event.
Figure 4-203. Alarm Configuration
tab brings up the RMON A
Description
This parameter specifies the table index.
must be configured.
C
LARM
ONFIGURATION
TRAP
page,