Jumper Settings; System Board Jumper Settings - Acer Altos 11000 System User Manual

Jumpers are prefixed " JP" . Connectors are
prefixed " CN" .
jumper or connector represents pin 1.
1.4.2

Jumper Settings

Table 1-1 lists the system board jumpers with their corresponding
settings and functions.
Table 1-1

System Board Jumper Settings

Jumper
Power Supply
JP1
BIOS Type
JP2
Password Security
JP3
5V Standby Source
JP4
SCSI Channel 1
High-Byte Termination
JP6
VGA Feature
JP7
*
Default setting
1-6
The blackened pin of a
Setting Function
1-2 * 420 W
2-3 200 W
1-2 Branded
2-3* Generic
1-2 Check password
2-3* Bypass password
1-2* For SPS with 5V standby
2-3 For SPS without 5V standby
1-2* Terminator always set to ON
2-3 SCSI terminator set to ON or OFF
by software
1-2 * Enabled/disabled through BIOS
2-3 Onboard VGA always disabled
User' s Guide