Filters - Acer AB460 F1 User Manual

384

Filters

The Filters link allows you to configure Layer 2 packet filtering.
The Layer 2 packet filtering management has the following
configuration pages:
• "Unicast Filters" on page 384
• "Multicast Filters" on page 385
Unicast Filters
Clicking the U
NICAST
C page, which sets the filter configuration to control the
ONFIGURATION
unicast packets that the switch needs to process. The parameters for
this page are shown in the following table.
Parameter
FDB ID
MAC Address
Receive Port
F tab brings up the L2 U
ILTERS
Description
This parameter specifies the forwarding database ID.
This parameter specifies the destination MAC address
of the received packet.
This parameter specifies the port on which the packet
was received.
4 Networking Switch Modules
F
NICAST ILTER