Virtual Interface - Acer AB460 F1 User Manual

415
Parameter
Authentication Key
IP Address
Designated Router
Status

Virtual Interface

Clicking the V
IRTUAL
C page. The parameters for this page are shown in the
ONFIGURATION
following table.
Description
This parameter specifies the key required for
authentication, if authentication is enabled on this
interface.
This parameter specifies the IP Address of the OSPF
interface.
This read-only field specifies the IP Address of the
Designated Router.
When this parameter is enabled, the interface is
advertised as an internal route to some area. When
disabled it denotes that the interface is external to
OSPF.
I tab brings up the OSPF V
NTERFACE
I
IRTUAL NTERFACE