442
RIP
Clicking the RIP tab brings up the RRD RIP C
allows you to re-distribute the routes that are learnt through other
routing protocols to RIP. The parameters for this page are shown in the
following table.
Parameter
RIP Status
Default Metric
Import
Route Tag Type
Route Tag
Description
This parameter enables or disables redistribution for
RIP.
This parameter specifies the metric for the routes that
are being re-distributed.
You can use this parameter to choose to import
routes, Static routes, OSPF routes
RIP.
This parameter describes whether a tag is
automatically
configured or
This parameter indicates the route tag in case you
configure a manual option for the tag type.
4 Networking Switch Modules
page, which
ONFIGURATION
BGP routes
and
manually
generated.
Direct
to