Acer AB460 F1 User Manual page 495

475
Parameter
Index
Alignment Errors
FCS Errors
Single Collision
Frames
Multiple Collision
Frames
SQE Test Errors
Deferred
Transmissions
Late Collisions
Excess Collisions
Transmitted
Internal MAC Errors
Carrier Sense Errors
Frame Too Long
Received Internal
MAC Errors
Description
This parameter specifies the port index.
This parameter specifies the number of alignment
errors. Alighment errors generally indicate improper
byte-alignment for Ethernet packets.
This parameter specifies the number of packets
received with checksum errors.
This parameter specifies the number of frames received
with a collision.
This parameter specifies the number of frames received
with multiple collisions.
This parameter specifies the number of Signal Quality
Errors that have occurred.
This parameter specifies the number of frames
deferred for transmissions due to network sense.
This parameter specifies the number of frames faced
late collisions. A collision is considered late if the jam
occurs after 512 bit-times, or 64 bytes.
This parameter specifies the number of excess collisions
detected. Excessive Collisions describe the situation
where a station has tried 16 times to transmit without
success and discards the frame. This means that there is
excessive traffic on the network and this must be
reduced.
This parameter specifies the number of MAC transmit
errors.
This parameter specifies the number of carrier sense
errors.
This parameter specifies the number of too long frames
received for transmission.
This parameter specifies the number of MAC received
errors.