Table of Contents
Advertisement
34/64
Bosch Rexroth AG
Transport and storage
Required tools:
8
Transport and storage
8.1
Delivery and unpacking
Screwdriver/cordless screwdriver, knife
Tipping hazard of the WS502 training system! It is possible that the centre of
gravity is off-centre; the centre of gravity shifts depending on the attachments!
Risk of injury when lifting and transporting!
Secure the training system when lifting and transporting in order to prevent
tipping.
Lift the WS502 training system only with a forklift truck or lift truck.
Procedure
Transport the wooden crate upright using a forklift truck or lift truck to the
unpacking space.
Use a screwdriver/cordless screwdriver to unscrew the front side of the
wooden crate and put it to the side.
Carefully open the plastic packing with the knife.
Lift the WS502 training system carefully off the pallet with a forklift and take it
out of the box.
Remove cable ties and adhesive tape carefully and dispose of them properly.
Discard the pallet and the wooden crate properly or properly store them for
later storage.
8.1.1 Make the gripper ready for operation
Secure the gripper against falling during transport.
Remove the packaging and transport locks from the gripper
Make sure that the gripper with the clutch is correctly mounted in the coupler
mechanism (for assembly instructions see chapter 10.14 on page 48).
Robotics Trainings System WS502
CAUTION
Advertisement
Table of Contents
