Symbols - Bosch WS502 Instruction Manual

Robotics Trainings System WS502
Safety information are structured as follows:
SIGNAL WORD
Type and source of the hazard
Consequences of non-compliance
Measures for averting danger

• Warning symbol: Points out the hazard
• Signal word: Indicates the severity of the hazard
• Type and source of the hazard: Identifies the type and source of the hazard
• Consequences: Describes the consequences of non-compliance
• Protection: States how you can avoid the hazard
Warning symbol, signal
word
HAZARD
WARNING
CAUTION
NOTE
Tabelle 1: Hazard classes according to ANSI Z535.6-2006
1.3.2

Symbols

The following symbols indicate instructions that are not safety-relevant but which
enhance the clarity of the documentation.
Symbol Meaning
If this information is not observed, the product cannot be
optimally used or operated.
Individual, independent process steps

1. Numbered job instruction:
2. The digits indicate that the process steps follow one
another.
3.
Tabelle 2: Meaning of the symbols
Bosch Rexroth AG
Meaning
Indicates a hazardous situation which will result in death or
serious bodily injury if it is not avoided.
Indicates a hazardous situation which could result in bodily
injuries if it is not avoided.
Indicates a hazardous situation which could result in minor
or moderate bodily injuries if it is not avoided.
Indicates property damage: The product or the
environment can be damaged/harmed.
7/64
About this documentation