General Information On Preventing Property Damage And Damage To Product - Bosch WS502 Instruction Manual

Robotics Trainings System WS502

General information on preventing property damage and damage to product

3 General information on preventing property
damage and damage to product
The system stands under pressure and tension!
Property damage!
Do not loosen/remove any connected lines, connections and components

while there is pressure in the system.
Do not loosen/remove any plug connectors as long as the system is

energized.
Switch the system off on the main switch.

The robot controller is equipped with an uninterruptible power supply. Voltage
can still be present here approximately 5 minutes after switching off.
Incorrect setting of pressure relief valves and pressure switches of pneumatic
components!
Property damage!
Operate the pneumatic components only with the recommended pressure

values.
Hazards for the electrical equipment due to high electrical currents!
Property damage!
Ensure the provision of an overcurrent protector.

Secure the power socket by pulling the mains plug.

Bosch Rexroth AG
NOTE
15/64