Toshiba e-STUDIO2010AC Imaging Manual page 72

2.Copier-specific Adjustments
Target area of hue
Subcode
For adjusting the tint of
3
For adjusting the tint of
4
For adjusting the tint of
5
(5) Select [05 ADJUSTMENT MODE] and arrange the color balance by changing the setting values for
the codes from [7960] to [7987] to adjust the density for each color.
Color to adjust Original mode [05] code Subcode
Y (Yellow)
M (Magenta)
Text/Photo
C (Cyan)
K (Black)
Y (Yellow)
M (Magenta)
Text
C (Cyan)
K (Black)
Y (Yellow)
M (Magenta)
Printed Image
C (Cyan)
K (Black)
Y (Yellow)
M (Magenta)
Photo
C (Cyan)
K (Black)
Y (Yellow)
M (Magenta)
Map
C (Cyan)
K (Black)
Y (Yellow)
M (Magenta)
User Custom
C (Cyan)
K (Black)
Y (Yellow)
M (Magenta)
Red Seal Color
C (Cyan)
K (Black)
• Set the value in increments of approximately 10, while checking the copy image until the optimum
value is obtained.
• The value for the code corresponding to the original mode (Text/Photo, Text, or Printed Image) will
affect the copy image quality in the Full color mode and the Auto Color mode.
© 2018 TOSHIBA TEC CORPORATION All rights reserved
adjustment
Setting a larger value: The tint of Cyan becomes closer
to that of B (Blue).
Cyan Setting a smaller value The tint of Cyan becomes closer
to that of G (Green).
Setting a larger value: The tint of Blue becomes closer to
that of M (Magenta).
Blue Setting a smaller value The tint of Blue becomes closer
to that of C (Cyan).
Setting a larger value: The tint of Magenta becomes
closer to that of R (Red).
Magenta Setting a smaller value The tint of Magenta becomes
closer to that of B (Blue).
05-7960
05-7965
05-7970
05-7975
05-7961
05-7966
05-7971
05-7976
05-7962
05-7967
05-7972
05-7977
05-7963
05-7968
0 / 1 / 2
05-7973
05-7978
05-7964
05-7969
05-7974
05-7979
05-7980
05-7981
05-7982
05-7983
05-7984
05-7985
05-7986
05-7987
2-18
Recommended value
Recommended
value
Set a value larger
than 128 to increase
the density.
Set a value smaller
than 128 to decrease
the density.
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
Acceptable
Default
value range
0 to 255 128