Toshiba e-STUDIO2010AC Imaging Manual page 166

3.Printer-specific Adjustments
You can also change the range of the color to be printed in only the K toner.
Original
PDL
mode
Text
PS Graphic
Image
Text
PCL Graphic
Image
Text
XPS Graphic
Image
Subcode Image Quality Type
0
1
2 Presentation
3
4
When "Text, Graphic & Image" is selected for the "Apply to" setting on the printer driver setting
menu, photo areas whose colors are close to black may be treated as black because the larger the
value is, the wider the area to be printed only with K toner becomes. Therefore, adjust the value
carefully while checking the copied image.
If black lines created by the graphic are still reproduced by 4 colors even after this adjustment has
been performed, change the settings of the application and reattempt printing.
When an illustrator is used, select [File] > [Document Setting] > [Custom] and then set to the value
to "Vector" in the Rasterization and Vector Balance option.
 Caution after the adjustment
Nothing in particular
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
[05] code Subcode Recommended value
8252 0/1/2/3/4
8253 0/1/2/3/4
8254 0/1/2/3/4
8210 0/1/2/3
8211 0/1/2/3
8212 0/1/2/3
8249 0/1/2/3/4
8250 0/1/2/3/4
8251 0/1/2/3/4
General
Photograph
Line Art
Advanced
3-6
Acceptable
value range
The larger the value,
the wider the area to
be replaced with that
for printing with only
black toner becomes.
The smaller the value,
the smaller the area to
be replaced with that
for printing with only
black toner becomes.
© 2018 TOSHIBA TEC CORPORATION All rights reserved
Default
1 to 255 8/8/8/8/8
1 to 255 1/1/1/8/1
1 to 255 1/1/1/8/1
1 to 255 8/8/8/8
1 to 255 1/1/1/8
1 to 255 1/1/1/8
1 to 255 8/8/8/8/8
1 to 255 1/1/1/8/1
1 to 255 1/1/1/8/1