Toshiba e-STUDIO2010AC Imaging Manual page 70

2.Copier-specific Adjustments
(1) Perform automatic calibration to correct variations in the copy density.
• [Admin] is selected from among the [Calibration Display Level] options by default. In other words,
an administrator is authorized to operate automatic calibration. But the [User] option can also be
selected to allow the user to operate it. Refer to the MFP Management Guide for further
information regarding how to select the [Calibration Display Level] option.
• Use steps (a) through (i) to perform automatic calibration.
(a) Press [User Functions -User-] on [Home] screen to enter the "User Functions" menu.
(b) Press [Admin].
(c) Enter an administrator password of 6 to 64 digits. Press [OK].
(d) Press [General].
(e) Press [Calibration].
(f) Press [Copy].
(g) Press [Calibration] to print out the test chart.
(h) Place the printed test chart on the original glass.
(i) Press the [START] button to perform calibration. When the calibration comes to an end, the
message "Scanning and calibrating" will disappear.
As a result of the above steps, the copy image quality will be corrected in the Full color mode
and the Black mode simultaneously.
After performing automatic calibration, copy and check the copy image quality.
If further image quality adjustments are still necessary, perform the next procedure.
(2) Perform hue adjustment to adjust the tint of the color in the color area to change.
Use steps (a) through (d) to perform the adjustment.
(a) Press [Image] on the Copy mode.
(b) Press [Hue].
(c) Press [+] or [-] on the indicator of the color to adjust.
Pressing [+] or [-] on the indicator changes the hue as shown below.
(For instance, press [+] at R (Red). Then the tint of R (Red) is closely matched with that of Y
(Yellow). Press [-] at R (Red). Then the tint of R (Red) will be closely matched with that of M
(Magenta).
(d) Press [OK].
After adjusting the hue, copy and check the copy image quality.
If further image quality adjustments are still necessary, perform the next procedure.
© 2018 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
2-16