To Improve The Gradation Reproduction Of Dark Portions In Photos - Toshiba e-STUDIO2010AC Imaging Manual

2.26

To Improve the Gradation Reproduction of Dark Portions in Photos

Before adjustment
 Explanation
To improve the gradation reproduction of images including dark portions, select the Printed Image
original mode or use the color balance.
If you want to improve the gradation reproduction of dark portions in photos only, but not to affect the
entire image, perform the adjustment by means of the following steps.
 Procedures
The service technician must perform all adjustments.
(1) Select [05 ADJUSTMENT MODE] and change the setting value for the code corresponding to the
original mode to be used.
Color mode Original mode [05] Code
Text/Photo
Full color /
Auto color
User Custom
Red Seal Color
• Set the value in increments of 1, while checking the copy image until the optimum value is
obtained.
• For the User Custom mode, refer to "2.19 To Program Frequently Used Copy Settings (To use
Custom Mode)".
© 2018 TOSHIBA TEC CORPORATION All rights reserved
05-7811 Set a value smaller than 3.
Text 05-7812 Set a value smaller than 4.
Base original mode is Text/
Photo: Set a value smaller
than 3.
Base original mode is Text:
05-7816
Set a value smaller than 4.
Base original mode is
Printed Image, Photo, Map:
Set a value smaller than 3.
05-7817 Set a value smaller than 3.
2-99
2.Copier-specific Adjustments
After adjustment
Recommended value
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
Acceptable
Default
value range
0 to 8 0