Toshiba e-STUDIO2010AC Imaging Manual page 325

(2) Select [05 ADJUSTMENT MODE] to adjust the values in the Custom mode, in order to obtain the
image quality the user desires.
• Select the necessary value for [05] code in the table below.
Color Sub
[05] Code
mode code
05-7400 -
05-7441 -
05-7470 -
Black
05-7475 -
05-7478 -
0
05-7480 1
2
Full
05-8370 -
color
© 2018 TOSHIBA TEC CORPORATION All rights reserved
Acceptable
Adjustment value
range
ADF noise
reduction level 0 to 200
setting
Background
adjustment
Sharpness
adjustment
Density
adjustment
(Manual
adjustment 0 to 255
(Center value))
Density
adjustment
(Automatic
density
adjustment)
Gamma balance
adjustment (Low
density)
Gamma balance
adjustment
(Middle density)
Gamma balance
adjustment (High
density)
Background
0 to 255
adjustment
5-19
5.Scanning-specific Adjustments
Default Setting value
When the value
decreases, the effect of
reducing streaks (set
with 08-8300) becomes
100 larger. When the value
increases, the effect of
reducing streaks (set
with 08-8300) becomes
smaller.
The larger the value, the
darker the background
becomes. The smaller
the value, the lighter the
background becomes.
The larger the value, the
sharper the image
becomes.
The smaller the value,
the softer the image
becomes and the less
moire appears.
The larger the value, the
darker the image at the
128 center value becomes.
The larger the value, the
darker the image at the
center value becomes.
The larger the value, the
darker the image of the
area surrounding the
target area becomes.
The larger the value, the
darker the background
128 becomes. The smaller
the value, the lighter the
background becomes.
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
Reference
section
5.11
5.2
5.5
-
-
-
5.2