10-3-10. Setting of the Internal Generation Matte Signal
(1) On the set-up menu screen, press the function keys in the following sequence.
[F5] (EFFECT) → [F3] (MATTE)
The EFFECT MATTE menu is displayed.
(2) Press [F2] (LIMIT) to set the illegal color limiter.
ON and OFF is switched by pressing [F2].
(3) Press [F3] (MAX) to set the maximum value of the luminance level.
100 and 107 is switched by pressing [F3].
(4) Press [F4] (MIN) to set the minimum value of the luminance level.
0 and _7 is switched by pressing [F4].
10-3-11. Setting of the Desired DME
Set whether the built-in DME (option: HKDS-7061/7071) or external DME equipment is used.
When the built-in DME is set, the VIDEO input of DME1 is fixed to the AUX1 bus, the KEY input of
DME1 is fixed to the AUX2 bus, and the DME EXT VIDEO input is fixed to the AUX3 bus.
(1) On the set-up menu screen, press the function keys in the following sequence.
[F6] (PERIPH) → [F2] (DME)
The DME menu is displayed.
(2) Press [F6] (DME INT) to select the desired DME.
INT and EXT is switched by pressing [F6].
INT : built-in DME
EXT : external DME equipment
HDS-7150/7100
EFECT
LIMIT
MAX
OFF
100
MATTE
F1
F2
F3
PERPH
DME
F1
F2
F3
MIN
0
F4
F5
F6
DME
INT
F4
F5
F6
HDS-7100
10-3. Set-up
10-17