Rack Mounting - Sony HDS-7150 Installation Manual

HKDS-7695/7695A

3-2. Rack Mounting

3-2. Rack Mounting
The HKDS-7695/7695A can be mounted in a 19-inch standard rack. Be sure to use the optional Rack
Mount Rail RMM-30.
Required Parts
Per one unit
. Rack Mount Rail (RMM-30)
Rails with brackets :
. Screws (B5 x 8) :
. Screws (B4 x 8) supplied with HKDS-7695/7695A : 6 pcs
. Screws for rack mounting (RK5 x 16) :
. Ornamental washers for rack mounting :
w
Be sure to fix the rack to the floor with bolts. When the unit is pulled out from the rack, this will prevent
its fall.
CAUTIONS
. Be sure to use the recommended rail when rack mounting. The unit cannot be fixed completely to a rack
by rack angles alone.
. Be sure to mount in the rack with two-person or more.
m
. If the HKDS-7695/7695A is mounted in the 19-inch standard rack, it is recommended to install a ventila-
tion fan to prevent a temperature rise in the rack. Make sure that all the units in the rack should be
operated within the temperature range of 5 °C to 35 °C.
. An installation manual is supplied with the Rack Mount Rail RMM-30. However follow the instructions
in this manual. Because the rack mounting procedures of the HKDS-7695/7695A differ somewhat from
the procedures explained in the RMM-30 installation manual.
3-2
2 pcs
8 pcs
4 pcs
4 pcs (Sony part number : 2-297-913-00)
HDS-7150/7100