Installation Slot Of Plug-In Boards - Sony HDS-7150 Installation Manual

7-1. Installation of Options for HDS-7150/7100

7-1-1. Installation Slot of Plug-in Boards

The HDS-7150/7100 can be used for various systems, and its functions can be extended by selecting the
optional boards.
Each plug-in board must be installed in the corresponding slot of the HDS-7150/7100. Confirm that all
the boards are in the specified slots.
For the details of how to install the plug-in board, refer to Section 7-1-3.
The board name are displayed near the eject lever at the left side on the A side (component side) of each
plug-in board. The slot number and a name of the plug-in board to be installed in the slot are indicated at
the upper side of the chassis in the HDS-7150/7100. Each optional board should also be installed at the
specified slot according to the slot number as well as the standard board.
Eject lever
Board name
A side (component side)
1 2 3 4
CPU-183 VSE-19 DLP-17 CPU-183
CKG-26 MPU-111
m
. If the board is installed in an incorrect slot, a system error occurs. Then the system is not properly
activated.
. Be sure to confirm the power supply voltage when an optional board is added or a board is replaced.
(Refer to "Section 8 Adjustment of Secondary Power Supply Voltage".)
7-2
6 7 8 9
5
MEM-65 MEM-65 MEM-65 VSE-20 VSE-21 CRK-9
(Y) (C) (K)
10 11 12 13 14
MIX-43 KPC-15 VSW-66 DSK-16
WKG-29 CCR-1827
15 16
DI-37 OUT-20
HDS-7150/7100