7-2. Installation of Options for BKDS-7071
(4) Push down the joint bracket to lock it.
Joint bracket
Joining of AD Panel
In the case of the horizontal direction, join the AD panels in the following procedures.
(1) Align the top and bottom of the AD panels to be joined as shown below.
(2) Put the bosses of the joint in the holes of the AD panel, and then install the joint in the AD panel
using the two screws.
Joint
Boss
B3 x 5
Boss
Boss
Joint
Boss
B3 x 5
* When you want to join the panels in both vertical and horizontal direction, join the panels to the vertical
direction after joining them to the horizontal direction.
7-18
HDS-7150/7100