4-3. Installation in Console
c
Be sure to install the control panel in the rack with three-person or more.
Prepared Parts
Screws (B4 x 6) : 11 pcs
(1) Lift the control panel with two-person or more. Then install the control panel in console while
supporting the control panel under the console with the other one person.
(2) Open the control panel. (Refer to Section 4-6.)
(3) Fix the control panel on the console by the screws (B4 x 6).
4-4. Matching Connectors
When connecting cables to various connectors on the rear panel at the time of installing, connecting or
servicing, connect the following connectors or their equivalents.
Connector indication on rear panel
SWITCHER
DME
TERMINAL 1, 2
REMOTE 1 to 4
OPTION PANEL
AC IN
*1 : The following solderless contact must be used for the plug.
AWG #18 to #22 : 1-566-493-21
AWG #22 to #24 : 1-564-774-11
AWG #24 to #30 : 1-564-775-11
HDS-7150/7100
B4 x 6
B4 x 6
Console
Connector parts No. and name (cable side)
D-sub 9-pin,Male
Connector 9-pin, Male : 1-560-651-00
Junction Shell 9-pin :
BVS Cable : 1-574-993-11
Power Supply Cord
(For the details of the power supply cord, refer to Section 1-2-3.)
BKDS-7017
B4 x 6
*1
1-561-749-00
BKDS-7017
4-3. Installation in Console
4-4. Matching Connectors
4-3