Installation Of Bkds-7091 - Sony HDS-7150 Installation Manual

7-2. Installation of Options for BKDS-7071

7-2-7. Installation of BKDS-7091

w
Before installing the BKDS-7091, be sure to turn off the power switch and turn off the breaker or remove
the power supply cord. If not, it will cause an electric shock.
Contents of BKDS-7091
Power unit : 1 pc
Screws (PS3 x 6) : 2 pcs
(1) Open the panel. (Refer to Section 4-6.)
(2) Turn off the power switches in the control panel. (Refer to "7-2-1. Turning On/Off the Power")
(3) Push the BKDS-7091 in the direction of the arrow 1 and put the BKDS-7091 in the direction of the
arrow 2.
(4) Turn the levers at both sides of the power unit in the direction of the allow.
(5) Secure BKDS-7091 to the control panel by the two screws supplied with the BKDS-7091.
Lever
PS3 x 6
PS3 x 6
1
2
BKDS-7091
(6) Turn on the power switches in the control panel.
(7) Close the panel.
7-20
HDS-7150/7100