Assigning Of Dme (Digital Multi Effects) - Sony HDS-7150 Installation Manual

HDS-7150
9-3. Set-up
Press the [F8] (NAME SELECT) key, [(], or [)] key to move the cursor to the desired name.
(8)
If the desired name is not displayed in the name list, select the "USER".
Press the [F6] (SELECT) key.
(9)
If selecting the name marked "?", enter the number from the numeric keypad. (The number is input
at the "?" position.)
When selecting the "USER" at the step (8), the function key indications change as follows.
F1
(10) After the table of the alphabets and the numeric keypad is shown, move the cursor to the desired
character.
(11) When pressing the [F10] (SELECT) key, the character on the cursor is selected.
(12) Repeat the steps (10) and (11), and select all characters.
(13) By pressing the [F9] (ENTER) key, the name is fixed and the display returns to the status of the
step (6).

9-3-5. Assigning of DME (Digital Multi Effects)

(1) In the set-up menu screen, press the keys on the display panel in the following sequence.
[1] (SYSTEM), [F4] (SYSTEM CONFIG)
The function key indications change as follows.
F1
9-12
F2 F3 F4 F5
F2 F3 F4 F5
BACK
CLEAR SPACE ENTER SELECT
F8 F9 F10
F6 F7
DME
CONFIG
F6 F7 F8 F9 F10
HDS-7150/7100