Cycle150 Measuring Cycle Parameters - Siemens SINUMERIK 840D sl Programming Manual

Parameter lists
4.1 Overview of measuring cycle parameters
No. Screen Cycle pa‐
form pa‐ rameters
rameters
18 S3
S_S3
19 EVN
S_EVNUM
20
S_MCBIT
21
_DMODE
22
_AMODE
All default values = 0 or marked as default=x
1)
Display depends on the general SD 54762 MEA_FUNCTION_MASK_TOOL
2)
Only for offset in tool and dimensional tolerance "Yes", otherwise parameter = 0
3)
For automatic measurement (S_MVAR=1x00xx), no display of measuring axis, offset axis ⇒ S_MA=0.
4)
4.1.15

CYCLE150 measuring cycle parameters

PROC CYCLE150(INT S_PICT,INT S_PROT,STRING[160] S_PATH) SAVE
ACTBLOCNO DISPLOF
338
Meaning
2nd speed for contact with rotating spindle
Number of the empirical value memory
Screen form of the _CBITs or _CHBITs
Display mode
Val‐ UNITS: Machining plane G17/G18/G19
ues:
0 = Compatibility, the plane active before the cycle call remains active
1 = G17 (only active in the cycle)
2 = G18 (only active in the cycle)
3 = G19 (only active in the cycle)
Alternative mode
Val‐ UNITS: Measuring the tool offset for radius
ues:
1 = no
2 = yes
TENS: Direction of the tool offset when measuring the radius in the 3rd axis of
the plane (for G17 Z)
1 = Positive
2 = Negative
HUNDREDS: Tool offset when measuring the length or when calibrating the probe
in the 3rd axis
0 = Compatibility, auto
1 = No
2 = Yes
THOUSANDS: Direction of the tool offset when measuring the length in the offset
axis (see S_MA HUNDREDS)
1 = Positive
2 = Negative
3)
2)
Programming Manual, 12/2017, 6FC5398-4BP40-6BA1
Measuring cycles