Siemens SINUMERIK 840D sl Programming Manual page 31

Workpiece probe SL 7
Entry in tool memory
Tool type ($TC_DP1[ ]):
Cutting edge ($TC_DP2[ ]):
Length 1 - geometry:
Length 2 - geometry:
Radius ($TC_DP6[ ]):
Length 1 - basic dimension
($TC_DP21[ ]):
Length 2 - basic dimension
($TC_DP22[ ]):
For turning-milling combination technology (1st technology is turning, 2nd technology is milling) with
1)
the requirements, setting data SD 42940 $SC_TOOL_LENGTH_CONST = 18 (or -18) and setting
data SD 42950 $SC_TOOL_LENGTH_TYPE = 2
The wear and other tool parameters must be assigned the value 0.
Workpiece probe SL 8
Entry in tool memory
Tool type ($TC_DP1[ ]):
Cutting edge ($TC_DP2[ ]):
Length 1 - geometry:
Length 2 - geometry:
Radius ($TC_DP6[ ]):
Length 1 - basic dimension
($TC_DP21[ ]):
Length 2 - basic dimension
($TC_DP22[ ]):
For turning-milling combination technology (1st technology is turning, 2nd technology is milling) with
1)
the requirements, setting data SD 42940 $SC_TOOL_LENGTH_CONST = 18 (or -18) and setting
data SD 42950 $SC_TOOL_LENGTH_TYPE = 2
The wear and other tool parameters must be assigned the value 0.
Measuring cycles
Programming Manual, 12/2017, 6FC5398-4BP40-6BA1
2.7 Probe, calibration body, calibration tool
Workpiece probe for a turning machine
580
710
1)
7
L1
L2
r
only if required
only if required
Workpiece probe for a turning machine
580
710
1)
8
L1
L2
r
only if required
only if required
Description
31