Siemens SINUMERIK 840D sl Programming Manual page 737

Operation Type
1)
for explanations, see legend (Page 776).
1) 2) 3) 4) 5)
DO A
DRFOF P
DRIVE G
DRIVEA P
DYNFINISH G
DYNNORM G
6)
DYNPOS G
DYNROUGH G
DYNSEMIFIN G
DZERO P
EAUTO G
Job Planning
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
Meaning
Keyword for synchronized action,
triggers action when condition is
fulfilled
Deactivation of handwheel offsets
(DRF)
Velocity-dependent path
acceleration
Activate bent acceleration
characteristic curve for the
programmed axes
Dynamic response for smooth
finishing
Standard dynamic response
Dynamic response for positioning
mode, tapping
Dynamic response for roughing
Dynamic response for finishing
Marks all D numbers of the TO
unit as invalid
Definition of the last spline section
by means of the last 3 points
W TP SA Description see
2) 3) 4)
FBSY
- +
PGsl
m + -
PGAsl
m +
Acceleration mode (BRISK, BRISKA,
SOFT, SOFTA, DRIVE, DRIVEA)
(Page 457)
PGAsl
+ -
Acceleration mode (BRISK, BRISKA,
SOFT, SOFTA, DRIVE, DRIVEA)
(Page 457)
PGAsl
m +
Activation of technology-specific
dynamic values (DYNNORM, DYNPOS,
DYNROUGH, DYNSEMIFIN,
DYNFINISH) (Page 461)
PGAsl
m +
Activation of technology-specific
dynamic values (DYNNORM, DYNPOS,
DYNROUGH, DYNSEMIFIN,
DYNFINISH) (Page 461)
PGAsl
m +
Activation of technology-specific
dynamic values (DYNNORM, DYNPOS,
DYNROUGH, DYNSEMIFIN,
DYNFINISH) (Page 461)
PGAsl
m +
Activation of technology-specific
dynamic values (DYNNORM, DYNPOS,
DYNROUGH, DYNSEMIFIN,
DYNFINISH) (Page 461)
PGAsl
m +
Activation of technology-specific
dynamic values (DYNNORM, DYNPOS,
DYNROUGH, DYNSEMIFIN,
DYNFINISH) (Page 461)
PGAsl
+ -
Free assignment of D numbers:
Invalidate D numbers (DZERO)
(Page 427)
PGAsl
m +
Spline interpolation (ASPLINE,
BSPLINE, CSPLINE, BAUTO, BNAT,
BTAN, EAUTO, ENAT, ETAN, PW, SD,
PL) (Page 230)
Tables
19.1 Operations
5)
737