Subprogram Call; Subprogram Call Without Parameter Transfer - Siemens SINUMERIK 840D sl Programming Manual

Flexible NC programming
1.24 Subprogram technique
3rd return jump parameter 1 = "N220", return jump parameter 3 = 2
After the
continued with block
1.24.3

Subprogram call

1.24.3.1

Subprogram call without parameter transfer

Function
A subprogram is called either with address L and subprogram number or by specifying the
program name.
A main program can also be called as a subprogram. The end of program
main program is evaluated as
program).
184
command, two program levels are jumped through and program execution is
RET
.
N220
M17
in this case (end of program with return to the calling
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
or set in the
M2 M30
Job Planning