Siemens SINUMERIK 840D sl Programming Manual page 152

Flexible NC programming
1.22 Read out file information (FILEDATE, FILETIME, FILESIZE, FILESTAT, FILEINFO)
<file name>
<result>
152
: Name of the file from which the file information is to be read out
Type:
The following points should be noted when specifying the file name:
 The specified file name must not contain any blank spaces or
control characters (characters with ASCII code ≤ 32), otherwise the
FILE...
allowed".
 The file name can be specified with path data and file identifier.
– Path data
Path data must be absolute, i.e. start with "/".
If a path is not specified, the file is searched for in the current
directory (= directory of selected program).
– File identifier
If the file name does not contain a domain identifier ("_N_"), it is
added accordingly.
If the fourth-last character of the file name is an underscore "_",
the next three characters will be interpreted as the file identifier.
In order to be able to use the same file name for all file
commands, e.g. via a STRING type variable, only the _SPF and
_MPF file identifiers may be used.
If there is no "_MPF" or "_SPF" identifier, the file name is
automatically completed with _MPF.
 The file name length can be up to 32 bytes, the path length up to
128 bytes.
Example:
"PROTFILE"
"_N_PROTFILE"
"_N_PROTFILE_MPF"
"/_N_MPF_DIR_/_N_PROTFILE_MPF/"
: Result variable (call-by-reference parameter)
Variable in which the requested file information is stored.
Type: VAR CHAR[8]
VAR CHAR[8]
VAR INT
VAR CHAR[5]
VAR CHAR[32]
CHAR[160]
command will be canceled with error code 1 "Path not
at
at
at
at
at
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
FILEDATE
Format: "dd.mm.yy"
FILETIME
Format: "hh:mm.ss"
FILESIZE
The file size is output in bytes.
FILESTAT
Format: "rwxsd"
(r: read, w: write, x: execute,
s: show, d: delete)
FILEINFO
Format: "rwxsd nnnnnnnn
dd.mm.yy hh:mm:ss"
Job Planning