Siemens SINUMERIK 840D sl Programming Manual page 348

Transformations
6.8 Kinematic transformation
Meaning
TRANSMIT
TRANSMIT(n)
TRAFOOF
Note
An active
channel, e.g.
Example
Program code
N10 T1 D1 G54 G17 G90 F5000 G94
N20 G0 X20 Z10 SPOS=45
N30 TRANSMIT
N40 ROT RPL=–45
N50 ATRANS X–2 Y10
N60 G1 X10 Y–10 G41 OFFN=1
N70 X–10
N80 Y10
N90 X10
N100 Y–10
N110 G0 Z20 G40 OFFN=0
N120 T2 D1 X15 Y–15
N130 Z10 G41
N140 G1 X10 Y–10
N150 X–10
N160 Y10
N170 X10
N180 Y–10
N190 Z20 G40
N200 TRANS
N210 TRAFOOF
N220 G0 X20 Z10 SPOS=45
N230 M30
Description
References
For a detailed description of the function, refer to:
Function Manual, Extended Functions; Chapter "M1 Kinematic Transformation" > "TRANSMIT"
348
: Activate TRANSMIT with the first TRANSMIT data set
: Activate TRANSMIT with the nth TRANSMIT data set
: Deactivate transformation
transformation is deactivated if another transformation is active in the
TRANSMIT
, ,
TRACYL TRAANG
.
TRAORI
Comment
; Tool selection
; Approach the start position
; Activate TRANSMIT with the first TRANSMIT-
; data set
; Set frame
; Square roughing; 1 mm tolerance (OFFN)
; Tool change
; Square part finishing
; Deselect frame
; Deactivate TRANSMIT
; Approach the start position
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
Job Planning