Sony MSB-2000 Operation Manual page 73

List of Menus
M:setup-msb menu
This menu contains common settings for the MSB-
2000.
Item number Category
M001 setup-msb
M002 setup-msb
M003 setup-msb
M004 setup-msb
M008 setup-msb
M009 setup-msb
M010 setup-msb
M011 setup-msb
M012 setup-msb
M013 setup-msb
M014** setup-msb
– setup-msb
– setup-msb
– setup-msb
– setup-msb
Note
The parameter file holds the values of all settings
in the B, C, E, L, M, N, S, and U menus and
SNMP menu.
For details of the parameter file, refer to the
Maintenance Manual.
Item Arguments
video_system 525
625***
lock-web unlock
lock
lock-telnet unlock
lock
lock-snmp unlock
lock
remote1 off
VTR
remote2 off
VTR
date [yymmdd]hhmm
lcd_cont 1 to 12 to 20
lcd_bright 1 to 9 to 20
serial_no –
opt_serial_no –
parameter_list –
parameter_file –
parameter_load –
list –
Function
Selects video system 525.
Selects video system 625.
Accepts control from from the web.
Inhibits control from the web.
Note
Even when control is disabled, this can be
unlocked through the web.
Accepts control from telnet.
Inhibits control from telnet.
Note
Even when control is disabled, this can be
unlocked through telnet.
Accepts control from snmp.
Inhibits control from snmp.
Note
Even when control is disabled, this can be
unlocked through snmp.
Disables VTR remote 1.
Enables VTR remote 1.
Disables VTR remote 2.
Enables VTR remote 2.
Sets the date and time.
(not on help) Sets the LCD contrast.
(not on help) Sets the LCD brightness.
Displays the serial number of the MSB-2000.
Displays the serial number of the MSBA-
20IP.
Displays all the currently set parameters.
This is a special-purpose command for
RS232C/telnet operation.
Creates a parameter file named
"PARAMS."
This is a special-purpose command for
RS232C/telnet operation.
Loads a parameter file named "PARAMS."
This is a special-purpose command for
RS232C/telnet operation.
Displays the list set for setup-msb.
This is a special-purpose command for
RS232C/telnet operation.
73