Table of Contents
Advertisement
Changing Settings Using a Web Browser
2
Perform the operations 1) to 3) below to enable
control of VTR.
1) Click "setup-msb."
Menu items of "setup-msb" appear.
2) Click the menu item "M008:remote1" or
"M009:remote2". (The description hereafter
assumes that "M008:remote1" has been
selected.)
A setting selection window appears at the right
of the screen.
3) Turn on the VTR radio button, and click the
SET button.
This enables the VTR connected to the
REMOTE1 connector to be controlled from this
unit.
3
In the GUI, click "VTR Remote Control" under
"Operation."
The VTR selection screen appears.
4
Click "VTR 1" or "VTR 2."
The VTR control window appears.
34
Advertisement
Table of Contents
