Table of Contents
Advertisement
Changing Settings Using a Web Browser
Changing Settings Using a Web Browser
Preparations
When connecting the 10BASE-T connector of this unit
to an Ethernet connector of the host computer (PC)
with an Ethernet cable, carry out the following
operations.
For details of installation and connections for this unit,
refer to the supplied Installation Guide.
1
Power on this unit.
2
Power on the PC, and start Windows.
3
Start the Internet browser (Recommended:
1)
Microsoft
Internet Explorer 5.0 or later), and
make the necessary settings.
For the method of making the browser settings, see the
next section "Making the Internet browser settings."
4
In the address box enter the IP address of this unit,
and press the Enter key.
The MSB-2000 GUI appears.
The default value for the IP address is
"192.168.1.2."
For details of how to set the IP address, see "To change
the IP address" (page 14).
.........................................................................................................................................................................................................
1) Microsoft is a registered trademark of Microsoft
Corporation in the USA and other countries.
Making the Internet browser settings
<For Microsoft Internet Explorer>
1
In the "Tools" menu, select "Internet Options."
The "Internet Options" dialog box appears.
2
In the "General" tab, "Temporary Internet files"
section, click the "Settings" button.
The "Settings" dialog box appears.
29
Advertisement
Table of Contents
