Sony MSB-2000 Operation Manual page 38

List of Menus
In tx-rx mode
( )
Item number Category
C002 setup (Rx)
C003 setup (Rx)
C004 setup
C005 setup (Tx)
C006 setup (Rx)
C011 setup (Tx)
C012 setup (Tx)
Item Arguments
frame_sync_ref stream
ref_in
sync_phase 0x600 to 800 to 9ff
monitor_select rx
tx
tx_c_caption off
on
rx_c_caption off
on
chroma 422
420
video_encmode IMX
NORMAL
LD
NORMAL_BL
Function
The STC obtained from the input stream is
used as the reference for SDI output.
The external analog composite input to the
REF IN connector is used as the reference
for SDI output.
Notes
• The analog reference must be a signal
such as black burst, with no amplitude
fluctuation.
• When ref_in is selected, the wordlength
for linear PCM audio samples is 16 bits.
Specifies any hexadecimal value from
0x600 to 0x9ff, to enable fine adjustment of
the SDI output sync phase.
The adjustment range is ±18.9 µs.
Selects the decoder monitor for the monitor
output.
Selects the encoder monitor for the monitor
output.
Disables processing to transmit closed
captions as Picture user data.
Enables processing to transmit closed
captions as Picture user data.
Note
This item is effective only when
video_system is 525.
Disables processing to put closed captions
transmitted as Picture user data on base
band.
Enables processing to put closed captions
transmitted as Picture user data on base
band.
Note
This item is effective only when
video_system is 525.
This is 422P@ML.
This is MP@ML.
This IMX encoding mode is characterized
by All Intra CBG.
This encoding mode is M=3 with Long
GOP CBR.
This yields a fixed latency, regardless of
the set bit rate.
This is a low delay mode, with All P Intra
slice.
This encoding mode is M=3 with Long
GOP CBR.
This yields the minimum latency,
depending on the set bit rate.
38