Sony MSB-2000 Operation Manual page 45

List of Menus
In tx-rx (cm) mode
( )
Item number Category
C012 setup (Tx)
C013 setup (Tx)
C014 setup (Tx)
C016 setup (Tx)
C018 setup (Tx)
C021 setup (Tx)
Item Arguments
video_encmode LD
SLD*
video_rate auto
manual
4.000 to 7.500 to 50.000 units of 2 kbps. If a certain degree of error
scene_change off
on
pict_size
720x480
544x480
480x480
352x480
720x576
544x576
480x576
352x576
seq_hdr_cycle continuous
interstitial
audio_encmode MPEG
LPCM
Function
This is a low delay mode, with All P Intra
slice.
This is a low delay mode, using field
structure.
Note
This is supported as an option.
The video ES bit rate is calculated
automatically from the TS rate and audio
settings. An 'A' appears after the numeric
value.
The video ES bit rate can be specified in
occurs, this is controlled to be below the
setting value.
Argument unit Mbps
When video_enc mode is IMX:
30.000, 35.000, 40.000, 45.000, 50.000
Mbps
When chroma mode is 420:
4.000 to 15.000 Mbps
In other cases:
6.000 to 30.000 Mbps
Notes
• When the MSBA-20IP is installed, keep
ts_rate within 35.000 Mbps.
• If "N014:maintenance video_rate" is set to
"extended," and video_encmode is other
than IMX, the minimum limit for
video_rate is 2 Mbps. Note, however, that
operation cannot be guaranteed at
present.
Disables scene change processing.
Enables scene change processing.
Sets the picture size when encoding is
performed.
• When video_system is 525:
Sets the picture size to 720x480.
Sets the picture size to 544x480.
Sets the picture size to 480x480.
Sets the picture size to 352x480.
• When video_system is 625:
Sets the picture size to 720x576.
Sets the picture size to 544x576.
Sets the picture size to 480x576.
Sets the picture size to 352x576.
Puts the sequence header on every
picture.
Puts the sequence header interstitially.
Specifies the audio encoding as MPEG1
layerII.
Specifies the audio encoding as linear
PCM (SMPTE 302M).
45