Sony MSB-2000 Operation Manual page 53

List of Menus
(In sdi_to_asi mode)
Item number Category
C114 setup
C115 setup
C116* setup
C117* setup
C118* setup
C119* setup
C120* setup
C121 setup
C124* setup
C125* setup
C126* setup
C127* setup
C128* setup
C129* setup
Item Arguments
tx_line_data2 off
on
tx_line_base 12 to 21
tx_vanc_data off
on
tx_vanc1_did 0x 00 to ff
tx_vanc1_sdid 0x 00 to ff
tx_vanc2_did 0x 00 to ff
tx_vanc2_sdid 0x 00 to ff
tx_vitc_data off
on
tx_udata1 off
on
tx_udata1_port 05000 to 09000 to 65535 Sets the UDP port No. for picking up user
tx_udata1_rate 1 to 30
tx_udata2 off
on
tx_udata2_port 05000 to 09001 to 65535 Sets the UDP port No. for picking up user
tx_udata2_rate 1 to 30
Function
Disables uncompressed line data
processing of 2nd line.
Enables uncompressed line data
processing of 2nd line.
PID is "pri_pid_base" +1.
Specifies the line number of the
uncompressed line. This line and the
following line can be transferred as
uncompressed lines.
Disables ancillary data processing in the
vertical blanking interval.
Enables ancillary data processing in the
vertical blanking interval. PID is
"pri_pid_base" +2.
Specifies the DID for vertical blanking
interval ancillary data.
Specifies the SDID for vertical blanking
interval ancillary data.
Specifies the DID for vertical blanking
interval ancillary data.
Specifies the SDID for vertical blanking
interval ancillary data.
Disables VITC private data transfer.
Enables VITC private data transfer.
PID is "pri_pid_base" +3.
Disables getting user data1 from the UDP
port, via the MSBA-20IP.
Enables getting User data1 from the UDP
port, via the MSBA-20IP.
PID is "pri_pid_base" +6.
data1 from the MSBA-20IP.
Specifies rate for getting user data1 from
the MSBA-20IP.
Unit: Mbps
Disables getting user data 2 from the UDP
port, via the MSBA-20IP.
Enables getting user data 2 from the UDP
port, via the MSBA-20IP.
PID is "pri_pid_base" +7.
data 2 from the MSBA-20IP.
Specifies rate for getting user data 2 from
the MSBA-20IP.
Unit: Mbps
53