Sony MSB-2000 Operation Manual page 39

Multi-format stream bridge
Table of Contents

Advertisement

List of Menus
In tx-rx mode
(
)
Item number Category
C013
setup (Tx)
C014
setup (Tx)
C016
setup (Tx)
C017*
setup (Tx)
C018
setup (Tx)
C021
setup (Tx)
C022
setup (Tx)
Item
Arguments
video_rate
auto
manual
4.000 to 7.500 to 50.000 units of 2 kbps. If a certain degree of error
scene_change
off
on
pict_size
720x480
720x512
720x576
720x608
history_udata
off
on
seq_hdr_cycle
continuous
interstitial
audio_encmode
MPEG
LPCM
mpeg_ch12_mode
stereo
dual
off
Function
The video ES bit rate is calculated
automatically from the TS rate and audio
settings. An 'A' appears after the numeric
value.
The video ES bit rate can be specified in
occurs, this is controlled to be below the
setting value.
Argument unit Mbps
When video_enc mode is IMX:
30.000, 35.000, 40.000, 45.000, 50.000
Mbps
When chroma mode is 420:
4.000 to 15.000 Mbps
In other cases:
6.000 to 30.000 Mbps
Notes
• When the MSBA-20IP is installed, keep
ts_rate within 35.000 Mbps.
• If "N014:maintenance video_rate" is set to
"extended," and video_encmode is other
than IMX, the minimum limit for
video_rate is 2 Mbps. Note, however, that
operation cannot be guaranteed at
present.
Disables scene change processing.
Enables scene change processing.
Sets the picture size when encoding is
performed.
• When video_system is 525:
Sets the picture size to 720x480.
Sets the picture size to 720x512.
• When video_system is 625:
Sets the picture size to 720x576.
Sets the picture size to 720x608.
History data for parameter referring re-
encoding is not included in the stream.
History data for parameter referring re-
encoding is included in the stream.
Note
• This is supported as an option.
• This item is effective only when
video_encmode is normal.
Puts the sequence header on every
picture.
Puts the sequence header interstitially.
Specifies the audio encoding as MPEG1
layerII.
Specifies the audio encoding as linear
PCM (SMPTE 302M).
Specifies the audio mode for channels 1
and 2 as stereo.
Specifies the audio mode for channels 1
and 2 as dual.
Disables the audio for channels 1 and 2.
39

Advertisement

Table of Contents
loading

Table of Contents