Sony MSB-2000 Operation Manual page 51

List of Menus
(In sdi_to_asi mode)
Item number Category
C018 setup (Tx)
C021 setup
C022 setup
C023 setup
C024 setup
C025 setup
C026 setup
C027 setup
C028 setup
Item Arguments
seq_hdr_cycle continuous
interstitial
audio_encmode MPEG
LPCM
mpeg_ch12_mode stereo
dual
off
mpeg_ch12_rate 128
192
256
384
mpeg_ch34_mode stereo
dual
off
mpeg_ch34_rate 128
192
256
384
lpcm_channel 1-2
3-4
1-4
1-8
lpcm_word_len 16
20
24
tx_audio_sg off
1 kHz
silence
Function
Puts the sequence header on every
picture.
Puts the sequence header interstitially.
Specifies the audio encoding as MPEG1
LayerII.
Specifies the audio encoding as linear
PCM (SMPET 302M).
Specifies the audio mode for channels 1
and 2 as stereo.
Specifies the audio mode for channels 1
and 2 as dual.
Disables the audio for channels 1 and 2.
Sets the bit rate of the audio for channels 1
and 2 to 128 kbps.
Sets the bit rate of the audio for channels 1
and 2 to 192 kbps.
Sets the bit rate of the audio for channels 1
and 2 to 256 kbps.
Sets the bit rate of the audio for channels 1
and 2 to 384 kbps.
Specifies the audio mode for channels 3
and 4 as stereo.
Specifies the audio mode for channels 3
and 4 as dual.
Disables the audio for channels 3 and 4.
Sets the bit rate of the audio for channels 3
and 4 to 128 kbps.
Sets the bit rate of the audio for channels 3
and 4 to 192 kbps.
Sets the bit rate of the audio for channels 3
and 4 to 256 kbps.
Sets the bit rate of the audio for channels 3
and 4 to 384 kbps.
Specifies channels 1 and 2 for linear PCM.
Specifies channels 3 and 4 for linear PCM.
Specifies channels 1, 2, 3, and 4 for linear
PCM.
Specifies channels 1, 2, 3, 4, 5, 6, 7, and 8
for linear PCM.
Sets the linear PCM sample word length to
16 bits.
Sets the linear PCM sample word length to
20 bits.
Sets the linear PCM sample word length to
24 bits.
Disables the internal test signal generator.
Enables the internal test signal generator
to output a 1 kHz sine wave.
Enables the internal test signal generator
to output silence.
51