Siemens Sinumerik 840C Diagnostics Manual page 59

04/96
3038 Double call of display
Scan
On selecting the display
Effect
Display build-up is aborted with the display that is repeatedly called in the same path.
Explanation
In a display, additional subdisplays can be configured which themselves can have subdisplays. If a display is cal-
led which does not correspond to a display already configured, recursion results. This is prevented by aborting the
display build-up and issuing an alarm.
Remedy
Avoid subdisplay linking which can lead to recursion.
3039 No multichannel display option
S
Scan
Cyclic
S
Effect
Fixed display parts only are displayed
Explanation
If data which is reserved for multi-channel display is configured in a display, it can be displayed correctly only if the
multi-channel display option is available.
Remedy
Set multi-channel display option.
3040 Field/variable cannot be displayed
S
Scan
Cyclic
S
Effect
Not all variable values/texts are displayed
S
Explanation
Field/variable incorrectly configured
(data group not available)
S
Field/variable programmed with too few places
S
Field/variable overflow (value range exceeded)
S
Format error; format cannot be changed
S
Illegal pointer
S
Remedy
Check field/variable with NC workstation and if appropriate delete and re-enter.
If the alarm occurs with standard displays then the value range has been exceeded.
3041 Too many fields/variables
S
Scan
Cyclic
S
Effect
Not all values/texts are displayed
S
Explanation
The display description is too long so that the internal buffer is no longer adequate for processing the display.
S
More than one display (main displays/secondary displays) have been configured with data selector.
S
Remedy
Using the NC workstation, the desired information must be reduced or divided amongst more than one display.
A maximum number of fields/variables cannot be specified since the fields/variables have different formats and
positions.
S
Configure only one display with data selector in conjunction with other displays.
3042 Error in dynamic graphics section
S
Scan
Cyclic
S
Effect
Dynamic graphics (columns) not entirely displayed
Explanation
The column graphics configured at the NC workstation are too extensive. A maximum of 4 Kbytes are available for
the whole cyclic part of the display (variable part of display including dynamic graphics) for all displays and insets.
Remedy
Reconfigure the display at the NC workstation, reduce the variable display parts and dynamic graphics.
3043 Error: NCK fixed display to MMC
S
Scan
On display selection
S
Effect
Not all fixed texts are displayed
Explanation
An error has occurred during transmission of fixed texts e.g.: delete window, fixed texts, etc. from NCK to MMC.
Remedy
Activate notebook for I code and send message to
S
System Support (system program change required)

Siemens AG 2001 All rights reserved 6FC5198–jAB40
SINUMERIK 840C / SIMODRIVE 611–D (DA)
1 Alarms
1.5.1 Alarm description
Acknowledgement key
Acknowledgement key
Acknowledgement key
Acknowledgement key
Acknowledgement key
Acknowledgement key
1–51