Siemens Sinumerik 840C Diagnostics Manual page 177

04/96
165013 There is no file with spindle drive motors
Scan
Drive MD/MSD/motor selection
Effect
No default possible for motor
Explanation
There is no system file
Remedy
Please notify Siemens Service
Note
Applies as from SW 4
165014 Selected drive has no spindle drive module
Scan
Drive MD: select motor
Effect
Function is not executed
Explanation
No active MSD drive available
Remedy
Enter MSD in drive configuration and transfer.
165015 Data transmission has been aborted
Scan
–
Effect
–
Explanation
This message always appears when the "Abort" softkey has been pressed during a file function and has also been
effective. The file function has therefore been performed incompletely. Because an incomplete file function can
lead to inconsistent data, an aborted loading operation, for example, should be repeated or the result of an incom-
plete save operation, for example, should not be used.
If the operation could no longer be interrupted at the time of operating the Abort key, e.g. because it has already
been completed to the maximum possible extent, then this message does not appear.
Remedy
Repeat operation if necessary.
165016 No file name entered
Scan
Save, load, delete, copy MD file functions
Effect
Function is not executed
Explanation
Call up function again, enter correct name
Remedy
–
165017 No valid file name entered
Scan
Save, load, delete, copy MD file functions
Effect
Function is not executed
Explanation
Name entered using illegal characters
Remedy
Call function again, enter correct name
165018 File must not be deleted
Scan
Deleting MD files
Effect
Function is not executed
Explanation
<online> and STANDARD data cannot be deleted
Remedy
–
165019 File cannot be edited
Scan
Selecting Edit or Edit new
Effect
Function is not executed
Explanation
BOOT files cannot be edited.
Remedy
–

Siemens AG 2001 All rights reserved 6FC5198–jAB40
SINUMERIK 840C / SIMODRIVE 611–D (DA)
1 Alarms
1.5.1 Alarm description
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey
1–169