Siemens Sinumerik 840C Diagnostics Manual page 138

1 Alarms
1.5.1 Alarm description
130009 Please state name
Scan
NEW / CREATE / mask for entering object name
Effect
No new workpiece or file is created
Explanation
No name was entered
The name was not terminated with input
Remedy
Enter a name or terminate input with input key
130010 Only NCK-data/part programs can be edited
Scan
EDIT
Effect
File cannot be processed
Explanation
A file was not selected (recognizable by the length, length 0 also possible) for processing with the editor
Remedy
Place the cursor on an element with a length entry
130011 Select a workpiece for job list
Scan
JOB LIST
Effect
Job list cannot be processed
Explanation
The job list of the selected workpiece cannot be processed
Remedy
Place the cursor on a workpiece
130012 There is no programming system
Scan
PROGRAMMING
Effect
Graphic programming not possible
Explanation
Graphic programming system does not exist.
Remedy
Install GRAPHIC PROGRAMMING SYSTEM option.
130013 Name not allowed
Scan
NEW / CREATE / mask for entering file name
Effect
No new object created
Explanation
Syntax of entered name is incorrect, only alphanumeric characters and "_" permitted
Remedy
Enter correct name
130014 No workpiece/file may be created
Scan
Softkey NEW at top level "LOCAL" "GLOBAL"
Effect
No new object created
Explanation
The data management tree does not allow the creation of a directory on this level
Remedy
–
130015 Access denied
Scan
PROGRAMMING
Effect
Workpiece cannot be processed
Explanation
Incorrect keyswitch setting
No authorization for processing workpiece
Remedy
Turn keyswitch to setting 1 or 2; enter password in DIAGNOSIS
1–130

Siemens AG 2001 All rights reserved 6FC5198–jAB40
SINUMERIK 840C / SIMODRIVE 611–D (DA)
04/96
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey