Siemens Sinumerik 840C Diagnostics Manual page 170

1 Alarms
1.5.1 Alarm description
160120 Wrong Trace number (domain) ...
Scan
Start-up application when reading out the TRACE buffer
Effect
Trace buffer could not be displayed
Explanation
–
Remedy
–
Note
Applies as from SW 4
160121 Trace header not initialized (domain) ...
Scan
Start-up application when reading out the TRACE buffer
Effect
Trace buffer could not be displayed
Explanation
–
Remedy
–
Note
Applies as from SW 4
160122 Trace active, no data (domain) ...
Scan
Start-up application when reading out the TRACE buffer while Trace function is running
Effect
Trace buffer could not be displayed
Explanation
–
Remedy
–
Note
Applies as from SW 4
160123 Illegal trigger threshold ...
Scan
Start-up application at start of SERVO TRACE function
Effect
SERVO trace is not started
Explanation
–
Remedy
–
Note
Applies as from SW 4
160124 Option is not available
Scan
Start-up application on selecting the circle form test function
Effect
Circle form test cannot be selected
Explanation
–
Remedy
Set circle form test option
Note
Applies as from SW 4
160125 Trace buffer already assigned
Scan
Start-up application on starting a measurement function
Effect
Measurement function is not started.
Explanation
Trace buffer is already assigned by Servo Trace
Remedy
Stop Servo Trace and restart measurement function
Note
Applies as from SW 4
1–162

Siemens AG 2001 All rights reserved 6FC5198–jAB40
SINUMERIK 840C / SIMODRIVE 611–D (DA)
04/96
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey