Editing Inputs/Values - Siemens SINUMERIK 840Di sl Operating Manual

2
01/2008

2.5.4 Editing inputs/values

© S iemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
If you wish to edit inputs/values, the corresponding key is always
displayed automatically on the right of the input field. The following
input fields are available:
1. Option buttons (single selection button/multiple option
button):
You can use the "Select" key to activate or deactivate a selection field.
Multiple selector button
(you can select several options or
none)
= active
= not active
2. Input fields:
Position the cursor on the input field and start to type. When you begin
typing, you automatically switch to Insert mode.
Confirm your input with the "Input" key. The value is accepted.
To change an existing value, press the "Edit" key to switch to insert
mode.
Enter the value or word (e.g. file name, etc.) on the alphanumeric
keypad.
In some fields, it is possible to choose between several preset values
by means of the "Toggle" key.
3. Selection list
Selection lists show you a selected value from a list of possible
values.
Press the "Edit" key to open a complete list of possible or existing
values.
Position the cursor on the value of your choice using the "Direction"
keys.
Operator Components/Operating Sequences
2.5 General operating sequences
Single-option button/option button
(only one option can be active at a
time)
= active
= not active
2
2-53