Siemens SINUMERIK 840Di sl Operating Manual page 250

5
Parameters operating area
5.8 Display system variables
5-250
Variable values marked by the cursor line are displayed on the left of
the display.
You do not need to normalize the display in any way, normalization
values are calculated automatically. The characteristic is automatically
normalized to values between minimum and maximum. Binary signals
are represented in expanded form.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
5
01/2008
© Siemens AG 2008 All rights reserved.