Siemens SINUMERIK 840Di sl Operating Manual page 338

6
"Program" operating area
6.9 Managing programs
Program management
Internal directory
name
Directory name on
interface
Internal file name
NC data types and
directories
6-338
The programs and files are stored in different directories and can be
administered in the Program and Services operating areas.
The details are shown in the following overview:
Name of directories: Operating area:
• Subprograms
• Part programs
• Workpieces
• Definitions
• Comments
• Standard cycles
• Manufacturer cycles
• User cycles
The following diagram shows an example of directory contents:
_N_DEF_DIR _N_CST_DIR _N_CMA_DIR
Definitions Standard cycles Manufact. cycles
_N_SMAC_DEF
_N_MMAC_DEF
_N_UMAC_DEF
_N_SGUD_DEF
_N_MGUD_DEF
_N_UGUD_DEF
_N_GUD4_DEF
...
_N_GUD9_DEF
_N_POCKET1_SPF
_N_..._SPF
Name in bold script: contained as standard
Names not in bold script: assigned by the user
File types can be identified by the file name extension (e.g. .MPF).
name.MPF
name.SPF
name.TEA
name.SEA
name.TOA
name.UFR
name.INI
name.COM
name.DEF
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
Programs and Services
Programs and Services
Programs and Services
Services
Services
Programs and Services
Programs and Services
Programs and Services
Program memory
_N_CUS_DIR _N_SPF_DIR _N_MPF_DIR _N_WKS_DIR _N_COM_DIR
User cycles Subprograms Parts programs W o rkp ie ces Comments
_N_L199_SPF _N_GLOB_SPF
_N_MPF1_MPF
_N_..._SPF
_N_..._SPF
_N_MOV_MPF
_N_..._MPF
_N_...
_N_SHAFT_WPD
_N_SHAFT_MPF
_N_PART2_MPF
_N_PART1_SPF
_N_PART2_SPF
_N_SHAFT_INI
_N_SHAFT_SEA
_N_PART2_INI
_N_PART2_UFR
_N_PART2_COM
_N_SHAFT
Main program
Subprogram
Machine data
Setting data
Tool offsets
Zero offsets/frames
Initialization file
Comment
Definition of global user data and
Macros
6
01/2008
_N_MPF123_WPD ...
_N_MPF123_MPF
_N_L1_SPF
_N_..._...
© Siemens AG 2008 All rights reserved.