Alignment Of The Channels/Mpfs To Be Displayed - Siemens SINUMERIK 840Di sl Operating Manual
Hide thumbs
Also See for SINUMERIK 840Di sl:
- Commissioning manual (632 pages) ,
- Programming manual (560 pages) ,
- Function manual (274 pages)
Table of Contents
Advertisement
6
01/2008
6.6.2 Alignment of the channels/MPFs to be displayed
HSK16 channel selection
dialog box in the
multiple ASCII view
Pre-assignment (default
setting) of the dialog box
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
Function
The channels/MPFs are aligned with respect to one another when
changing-over from the step view into the multiple ASCII view.
•
Starting from the step current in focus, the steps are used that
are at the same height horizontally in the graphic step view.
•
Alignment in ASCII next to one another on a common reference
line in the upper lines of the ASCII window.
Note
For the time-based view for cursor left/right, the end of step in time is
used as reference to select the step in the adjacent channel.
However, it is not the last ASCII line of the step so obtained – but for
the alignment of the channels next to one another, in the reference
line, it is the first line that is relevant - the start of the step.
The following dialog box is displayed if HSK16 is pressed in the
multiple ASCII view:
When the channel selection dialog box is displayed, the currently
displayed channels/MPFs all of the channels/MPFs open in the MCSP
are marked (selected) by activating the associated checkboxes in the
list.
In this dialog box, the user can manually influence the channels
selected by changing over into the multiple ASCII view. The possible
settings correspond to those described in the section "Manual entry".
The dialog boxes pre-assigned from the actual environment, this
means:.:
•
When "automatic determination through synchronization" is
active, channels are selected sensitive to the context depending
on the cursor when selecting the multiple ASCII view. When the
dialog box is opened, these channels are selected in the
checkbox.
•
When channel selection "manual entry" is active, the last selected
or those saved in the ini are selected – if no other selection was
made.
"Program" operating area
6.6
Multiple editor (option)
6
6-285
Advertisement
Table of Contents
